Dies & Taps

Dies & Taps

Browse all Dies & Taps products (10)
per page
Set Descending Direction
  1. DTPC
    Best Seller
    HSS Metric Coarse Hand Tap
    • loading...
    *BEST SELLER* General purpose hand threading on all material, available in bottom, intermediate or taper.
    Bottom/Intermed/Taper | Sizes: M3 - M30
    View Details
    *BEST SELLER* General purpose hand threading on all material, available in bottom, intermediate or taper. View Details
    Bottom/Intermed/Taper | Sizes: M3 - M30
    loader
    Expand Order Table Hide Order Table
  2. View Details
    Spiral flute taps are ideal for machine tapping in blind holes, driving the chips back. View Details
    Sizes: M5x0.8 - M24x3.0
    loader
    Expand Order Table Hide Order Table
  3. DTPSPC0010-EUROMARC-HSS-SPIRAL-POINT-MAC
    *BEST SELLER* Common Gun Taps used mainly for machine tapping through holes, direct chip ahead.
    Sizes: M4x0.7 - M24x0.3
    View Details
    *BEST SELLER* Common Gun Taps used mainly for machine tapping through holes, direct chip ahead. View Details
    Sizes: M4x0.7 - M24x0.3
    loader
    Expand Order Table Hide Order Table
  4. DTPF
    General purpose hand threading on all material. Available in bottom, intermediate or taper.
    Bottom/Intermed/Taper | Sizes: M5 - M36
    View Details
    General purpose hand threading on all material. Available in bottom, intermediate or taper. View Details
    Bottom/Intermed/Taper | Sizes: M5 - M36
    loader
    Expand Order Table Hide Order Table
  5. DTPUNCB001-EUROMARC-HSS-UNC-HAND-TAP-BOT
    *BEST SELLER* GP UNC thread taps used on all materials. Comes in bottom, intermediate or taper..
    Bottom/Intermed/Taper | Sizes: 3/16 - 1"
    View Details
    *BEST SELLER* GP UNC thread taps used on all materials. Comes in bottom, intermediate or taper.. View Details
    Bottom/Intermed/Taper | Sizes: 3/16 - 1"
    loader
    Expand Order Table Hide Order Table
  6. DTPUNFB716-EUROMARC-HSS-UNF-HAND-TAP-BOT
    GP UNF thread taps used on all materials. Comes in bottom, intermediate or taper.
    Bottom/Intermed/Taper | Sizes: 3/16 - 1"
    View Details
    GP UNF thread taps used on all materials. Comes in bottom, intermediate or taper. View Details
    Bottom/Intermed/Taper | Sizes: 3/16 - 1"
    loader
    Expand Order Table Hide Order Table
  7. DTPBSF
    BSPF parallel thread taps. Available in bottom, intermediate or taper.
    Bottom/Intermed/Taper | Sizes: 1/8 - 1"
    View Details
    BSPF parallel thread taps. Available in bottom, intermediate or taper. View Details
    Bottom/Intermed/Taper | Sizes: 1/8 - 1"
    loader
    Expand Order Table Hide Order Table
  8. View Details
    BSPT taps used for pipe/taper threads. Available only in bottom tap. View Details
    Sizes: 1/8 - 1/2"
    loader
    Expand Order Table Hide Order Table
  9. DTBDDUC1012-HSS-METRIC-COARSE-BUTTON-DIE
    Quality high speed steel button dies for cutting new or cleaning existing threads.
    Sizes: 9/16 - 1" | 1 - 2 OC
    View Details
    Quality high speed steel button dies for cutting new or cleaning existing threads. View Details
    Sizes: 9/16 - 1" | 1 - 2 OC
    loader
    Expand Order Table Hide Order Table
  10. View Details
    Made with high speed steel, use in conjunction with a spanner. View Details
    Sizes: M5x0.8 - M30x3.5
    loader
    Expand Order Table Hide Order Table

You have viewed 10 products

per page
Set Descending Direction
Resources
  1. 17 troubleshooting tips for threading with metal cutting taps
    17 troubleshooting tips for threading with metal cutting taps
    Having issues with your threading? Not sure what's going wrong? Read on below... Read More