HYDREX MV Arctic 15 Hydraulic Fluid

Our crystal-clear base oil is produced using the HT purity process, removing impurities that hinder the performance of competitive conventional oils. Blended with our specialty additives, HYDREX MV Arctic 15 provides exceptional anti-wear protection, extending equipment life for reduced maintenance and downtime.

HYDREX MV Arctic 15 fluid offers outstanding oxidation and thermal stability, preventing sludge build-up and varnish deposits to ensure smooth, reliable operation of hydraulic valves and actuators. Plus, our excellent water separability and hydrolytic stability allow for easy removal of water without loss of performance additives.

With great foam and air release performance, HYDREX MV Arctic 15 prevents overflowing of reservoirs and eliminates "sponginess" from hydraulic systems, preventing pump cavitation. Our improved rust and corrosion protection ensures iron and other metal components are protected against water damage.

Our product is readily biodegradable, making it the responsible choice for your hydraulic systems. HYDREX MV Arctic 15 is recommended for vane, gear, and axial piston hydraulic pumps for applications requiring ISO viscosity grades 10 and 15, and can be used in emergency shutdown valves or other critical low temperature heavy-duty hydraulic systems that require quick and reliable response.

Compatible with other zinc-based, petroleum hydraulic fluids and polyalphaolefin (PAO) synthetic fluids, HYDREX MV Arctic 15 can be easily integrated into your hydraulic system. However, to obtain maximum performance and service life benefits, systems should be thoroughly drained and flushed prior to filling with HYDREX MV Arctic 15.

Choose HYDREX MV Arctic 15 for unparalleled performance and reliability in extreme cold temperature hydraulic operations.

Features & Benefits

• Developed for arctic conditions
• Allows hydraulic systems to start at temperatures < -50°C/-58°F under no-load conditions

• Excellent low-temperature flow characteristics result in easy start-ups and faster hydraulic system pressurization

• Exceptional anti-wear protection

• Extends equipment life for reduced maintenance and downtime

• Outstanding oxidation and thermal stability

• Prevents sludge build-up and varnish deposits to ensure smooth, reliable operation of hydraulic valves and actuators

• Helps extend the time between oil changes

• Excellent water separability and hydrolytic stability

• Reusable after water is removed because HYDREX MV Arctic 15 separates readily without loss of performance additives

• Great foam and air release performance

• Prevents overflowing of reservoirs

• Eliminates “sponginess” from hydraulic systems and prevents pump cavitation

• Improved rust and corrosion protection

• Iron and other metal components are protected against water damage

• Readily biodegradable as measured by OECD 301B

Applications

HYDREX MV Arctic 15 is recommended for vane, gear, and axial piston hydraulic pumps for applications requiring ISO viscosity grades 10 and 15. HYDREX MV Arctic 15 is also recommended for use in emergency shutdown valves or other critical low temperature heavy-duty hydraulic systems that are required to respond quickly and reliably, including extremely low temperatures down to -45°C/-49°F.

HYDREX MV Arctic 15 has been shown to be compatible with other zinc-based, petroleum hydraulic fluids and polyalphaolefin (PAO) synthetic fluids. However, to obtain maximum performance and service life benefits, systems should be thoroughly drained and flushed prior to filling with HYDREX MV Arctic 15. Please refer to TB-1284 for changeout procedure instructions. It is also compatible with typical seal materials and will not attack valve seals.

Approvals

• Bosch Rexroth: Recommended for use in equipment manufactured by Bosch-Rexroth
• Denison: Recommended for use in equipment manufactured by Denison
• Dynex: Recommended for use in equipment manufactured by Dynex
• Eaton: Approved for Eaton E-FDGN-TB002-E, Recommended for use in equipment manufactured by Eaton Vickers
• Hydreco: Recommended for use in equipment manufactured by Hydreco
• Komatsu: Recommended for use in equipment manufactured by Komatsu
• Oilgear: Recommended for use in equipment manufactured by Oilgear
• Sauer-Danfoss: Recommended for use in equipment manufactured by Sauer-Danfoss

HYDREX MV Arctic 15 is NSF H2 listed (no allowable food contact)