Sherwin DR-64 Cleaner/Remover 400ml, Aerosol
DUBL-CHEK DR-64 Cleaner / Remover can be used in the solvent remove penetrant process and to remove CP-2 white contrast paint from part surfaces. In the penetrant process it is a manual wipe on and wipe off material and is recommended for small areas. When removing CP-2 spray directly onto the surface and wipe. DR-64 may also be used for generally cleaning oily, dirty surfaces. DR-64 is especially suitable for cleaning prior to the application of inspection penetrants. Complies with low sulfur and low halogen requirements.
Every aerosol contains a direct spray tube for easy removal of white contrast paint. Can be used as a pre-cleaner for penetrant inspection evaporates completely and rapidly. Aerosols offer convenience and portability. Can be used in the penetrant and magnetic particle inspection process.
Why’s Sherwin so good?
Sherwin NDT products are market leaders in quality, performance and reliability – a bold statement, but backed up by over 26 critical manufacturer approvals, including Boeing, Airbus, Rolls-Royce, Lockheed-Martin and other OEM’s. Together, NDT products provide a non-destructive method of inspecting materials, parts, assemblies, equipment, surfaces and structures often referred to as the ‘visible dye penetrant method’ or ‘colour contrast method’ of inspection. Also, it’s water soluble. Remove excess penetrant with a simple water wash - no need for harsh and dangerous chemicals during inspection.
Used to find:
- Cracks, lack of fusion and open cavities in welded parts
- Cracks and cavities caused by metal fatigue and cutting operations
- Check of porosity or leaks in pipes, tanks, boilers, heat exchangers
- Discontinuities, laps, folds and cracks in castings, forgings and ceramics