Resources

All Resources (240)
  1. What Flaw Finder Do I Need?

    Chasing cracks, porosity, or hidden flaws? You need flaw finder. But which is best for your job? Let's find out...As an engineer, choosing the right NDT (non-destructive testing) products is cruc... Read more
  2. The Hidden Costs of Running Out of Sprays and How to Dodge Them

    Running out of sprays mid job can cause delays, disrupt workflow and cost more than you think. The good news? Staying on top of it doesn't have to be hard. Here’s how to keep your spray supplie... Read more
  3. EasyGate say TECMEN G10's are a must have

    EasyGate say TECMEN G10's are a must have

    EasyGate, Tauranga – Success Story   'If you want to improve your staff's health, productivity — it’s really a must-have.'   Ray from EasyGate explains how TECMEN powered ai... Read more
  4. Happy, Comfortable Staff Matter at Extreme Boats

    Happy, Comfortable Staff Matter at Extreme Boats

    Extreme Boats, Whakatane – Success Story   'Happy staff are going to stay around for longer. It does take a long time to get staff trained up. They've got a pretty special skill set, a ... Read more
  5. Nothing Else Cuts It for D&W Engineering

    Nothing Else Cuts It for D&W Engineering

    D&W Engineering, Hawera – Success Story   ‘If I bring anything else into the shop they’ll virtually throw it back at me.’   Damian at D&W Engineering talks about the products the... Read more
  6. Patton Engineering Boosts Efficiency & Cuts Costs with QUICKSTOCK

    Patton Engineering Boosts Efficiency & Cuts Costs with QUICKSTOCK

    Patton Engineering, Wellington – Success Story   ‘Works well for us, works well for the client. No one's getting overcharged.’   Sam from Patton Engineering tells us how QUICKSTOCK ha... Read more
  7. Why Engineers are Jumping on the G10 & G20 Trend

      If you’ve stepped onto a workshop floor lately, you may have noticed something different. More and more engineers, fabricators, and welders are upgrading their gear. The latest must-have? The TE... Read more
  8. The Hidden Dangers of Workshop Fumes

    The Hidden Dangers of Workshop Fumes

    You wear a respirator to stay safe — but what if it's not working as well as you think? When you grind or cut, hazardous fumes and fine particles fill the air. If your respirator isn’t sealed... Read more
  9. Non-Powered vs Powered Air Welding Helmets: Which One Is Right for You?

    Non-Powered vs Powered Air Welding Helmets: Which One Is Right for You?

    When it comes to welding safety, the stakes are high. Did you know the wrong helmet choice could leave you exposed to toxic welding fumes or struggling to meet New Zealand safety standards? Let’s ma... Read more
  10. TruckBuild Found A Well-Priced Solution To Inventory Management

    TruckBuild Found A Well-Priced Solution To Inventory Management

    TruckBuild NZ, Brightwater, Nelson – Success Story   ‘It's a great solution to have stock on hand without a massive overhead of costs on our part.’   Tyler from TruckBuild NZ tells us... Read more
  11. How Dunlea Products Keep On Top Of Production

    How Dunlea Products Keep On Top Of Production

    Dunlea Products Ltd, Kaikoura  – Success Story   ‘A lot of the cheaper glasses will just shatter, but not those CRAFTSMAN. Very, very good.’   Grant’s out exploring beautiful Kaikōura ... Read more
  12. Rata Equipment say getting QUICKSTOCK was a No Brainer

    Rata Equipment say getting QUICKSTOCK was a No Brainer

    Rata Equipment, Winchester, South Canterbury  – Success Story   ‘We have never experienced stockouts or late deliveries since adopting QUICKSTOCK. The system is always well-stocked and repleni... Read more
You have viewed 1 - 12 insights
Page