Hydrex XV All Season Hydraulic Fluids - Year-Round Performance

Don't let the weather stop you from getting the job done. Hydrex XV is recommended for year-round use in equipment that has started at temperatures as low as -40 degrees Celsius and can operate at temperatures as high as 79 degrees Celsius. Whether you're in the woodlands, construction, mining, public utility, or marine operations, this fluid will give you excellent results and increased productivity in extreme weather conditions.

Say goodbye to monograde hydraulic oil and hello to energy efficiencies with Hydrex XV. This fluid allows hydraulic systems to start at temperatures as low as -34°C/-29°F, with an operating range between -14°C/7°F to 90°C/194°F for mobile equipment, and -14°C/7°F to 78°C/172°F for industrial machinery.

Hydrex XV is recommended for use in piston, gear, and vane hydraulic pumps found on industrial machinery and mobile equipment. Plus, it can be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging.

So why settle for less? Choose HYDREX™ XV All Season Hydraulic Fluids for exceptional performance and productivity all year round.

Features & Benefits

• Offers increased productivity in very hot or cold temperatures
• Energy efficiencies are realized compared to monograde hydraulic oil when exposed to wide temperature fluctuations
• Allows hydraulic systems to start at temperatures as low as -34°C/-29°F, with an operating range between -14°C/7°F to 90°C/194°F for mobile equipment, and -14°C/7°F to 78°C/172°F for industrial machinery

Applications

Suited for industrial machinery used in forestry, construction, mining, public utility, and marine operations.

Recommended for year-round use in piston, gear, and vane hydraulic pumps found on industrial machinery and mobile equipment.

May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging.

Approvals

• Bosch Rexroth: Meets the requirements of the Rexroth A2F10 pump test. Recommended for use in equipment manufactured by Bosch-Rexroth.
• Denison: Approved for Denison HF-0. Recommended for use in equipment manufactured by Denison.
• Dynex: Recommended for use in equipment manufactured by Dynex.
• Eaton: Approved for Eaton E-FDGN-TB002-E. Recommended for use in equipment manufactured by Eaton Vickers.
• Hydreco: Recommended for use in equipment manufactured by Hydreco.
• Oilgear: Recommended for use in equipment manufactured by Oilgear.
• Racine: Recommended for use in equipment manufactured by Racine.
• Sauer-Danfoss: Recommended for use in equipment manufactured by Sauer-Danfoss.

Industrial Standards

Meets:

• DIN 51524 Part 3 HVLP
• ISO 11158 HV
• ASTM D6158 HV
• JCMAS HK

Suitable for use:

• AIST 126 and 127